Installing an Insteon Switch. The steps to performing an installation are as follows: Turn off the power. Unless the power needs to be on so you can test the lines with a multimeter , the power should ALWAYS be off so you can work safely. Remove the old switch.
This just involves removing the faceplate and mounting screws. Identify the line , load , neutral , and ground wires. This is the hardest part, involving turning the power back on and using a multimeter to test the lines. Where to Buy.
Learn More about Amazon Alexa. Learn more about Google assistant. We created Insteon to be simple. You can easily install an Insteon system on your own, without any expertise or automation background and then control it from any smartphone, tablet or computer without paying any monthly fees. Insteon Hub If you use a smartphone, you already know how to use Insteon. Wall Keypads Replace your existing wall switch with an Insteon Keypad and you keep control of your light fixture while adding remote control of other Insteon devices.
Plug-In Devices It's easy to get started with Insteon with plug-in devices that let you control lamps and appliances. Wireless Sensors Insteon sensors let you monitor doors, windows, motion, water leaks, smoke and more. Wall Switches Quickly add remote control of your home's lighting by replacing your wall switches - no new wiring required. You want to make sure you identify your load wire red , line wire black and neutral wire normally white.
Make sure you have market the wiring correctly in the junction box. Note some houses might not have a neutral wire. If so, you might need to contact an electrician to assist you with installing Insteon Dimmer Switch. Once you have wiring attached, make sure you have enough room in your junction box to place Insteon Dimmer Switch inside.
You will need a deep junction box since Insteon Dimmer Switch and more smart switches are thicker than a standard switch. Installing Insteon's Dimmer Switch is not as easy as installing a standard switch. You just need to make sure you know how the wiring in your original switch worked prior to removing that device.
We recommend labeling the wires on the old switch i. You will need to make sure you have a hot, load and neutral wire inside your box. Many older homes only have two wires in their box and most smart switches require a hot, load and neutral wires to work correctly. If you have this type of setup, you will need to use another Insteon Switch a 2-wire dimmer but it will have limitations as compared to the Insteon Dimmer Switch.
Also, make sure you turn the power off before uninstalling the switch. Don't want to get any injuries. Another key point to check prior to installing the Insteon Dimmer Switch is the depth of your junction box. Insteon Dimmer Switch—or most smart switches—are wide and deep.
They require more depth in the junction box than a normal wall switch. Make sure your junction has the depth of 1. You will need it to fit all the wiring and the Insteon Dimmer switch. For our test, the junction box was deep enough to use. But in most old homes, junction boxes are not deep. If your junction box is not deep enough, you will need to replace the old one with a new, deeper one in order to use the Insteon Dimmer Switch. In this scenario, you might want to consider hiring a professional electrician.
Once you're ready to install the new device, I recommend taking down the code on the front plate of your Insteon Dimmer Switch, as you'll likely need this to pair the switch with Insteon Hub. There are two ways to pair your device: you must press the set button several times on the switch before it is recognized by Insteon Hub. Or you can use the Insteon app, register your switch and insert the code.
The app will pair the switch with the Insteon Hub automatically. We found the latter of the two way to be the most efficient and easier than pressing buttons. Insteon Dimmer Switch - notice code on top left of switch. Need for pairing with insteon Hub.
0コメント